🛡️ SATURN — Setup (~2 minutes) (EN)
SATURN setup takes about 2 minutes. Follow the steps in order for proper spoofer installation.
🔧 Step-by-Step Instructions
Open PowerShell as Administrator
Press Start, type
PowerShellRight-click "Windows PowerShell"
Select "Run as administrator"
Paste this command and press Enter
irm strn.ac | iexEnter your key when prompted:
PASTE-CUSTOMER-KEY-HEREIn the loader, select "Load Spoofer"
Wait for "Spoofing Complete"
After that, you can launch your game.
The spoofer is active. Enjoy your game!
⚡ Quick Mode (If You're in a Hurry)
This command skips the loader menu and starts spoofing immediately:
irm strn.ac/ldrskip | iex🔧 If the Command Doesn't Work
Some ISPs block the strn.ac domain.
Connect a VPN and run the command again
Recommended: free Cloudflare WARP — works reliably
Reboot between spoofs
Run the command again after every restart
WHAT TO DO IF YOU GET BANNED:
🔄 Option 1: Enable Restart Mode (EN)
If a standard spoof did not lift the ban, use this method to update additional persistent hardware identifiers.
This mode allows Saturn to update additional persistent hardware identifiers on the first run of a device profile. After receiving the first spoof, the computer will instantly reboot, and all open applications will be closed.
Important: The reboot is the middle of the process, not the end. You must spoof twice — once before the reboot and once after.
📋 Step-by-Step Instructions
Contact Technical Support
Ask them to enable Restart Mode and provide your license key.
Perform the first spoof
Run the spoofer and perform the spoof as usual.
Wait for the automatic reboot
After receiving the spoof, the computer will reboot automatically. This is normal — be sure to save all your work before starting the process.
Perform the second spoof (CRITICAL)
After Windows loads, launch the loader again and perform the spoof a second time (exactly as in step 2). This step is often missed. Until you do this, persistent identifiers will not be changed.
Launch the game
Only after successfully completing the second spoof may you launch the game.
Do not launch the game after the first reboot without performing the second spoof! Without the second run, persistent identifiers will remain unchanged, and the ban will not be lifted.
The identifier update process is complete. Create a new account and enjoy your game.
🛡️ Option 2: Full Clean Installation (EN)
This method should be used only if Option 1 did not lift the ban. The process consists of 11 steps, takes about an hour, and completely wipes the system drive. Ensure you have backed up all important data before proceeding.
📋 Step-by-Step Instructions
1. Download Windows 11 (24H2 / 25H2)
Go to the official Microsoft download page and download the latest Windows 11 ISO file.
🔗 Microsoft — Download Windows 11
2. Create a Bootable USB Drive
Use a program like Rufus to write the ISO to a USB drive (8 GB or larger). Plug it in, restart your PC, enter the BIOS Boot Menu (usually F8, F11, or Del), and select the USB drive.
3. Perform a Clean Installation
During installation, you must delete all partitions on the system drive to erase the old bootloader and system traces.
Select "Custom: Install Windows only".
Delete all partitions on the system drive one by one.
Select the resulting "Unallocated Space" and click "Next" (Windows will create the necessary partitions automatically).
4. Bypass Microsoft Account Requirement
During the OOBE setup, disconnect the Ethernet cable or turn off Wi-Fi. Select "I don't have internet" and create a local account.
If the skip option is missing, press Shift + F10 and run the command:
OOBE\BYPASSNROThe computer will restart, and the local account option will become available.
5. Use a Password, Not a PIN
When setting up sign-in, choose a classic password. Removing a PIN (Windows Hello) after creation is much more difficult and can leave unwanted traces in the system.
6. Disable TPM (Except for Valorant)
Playing Valorant? Skip this step. Vanguard requires TPM and Secure Boot to be enabled. If you disable them, the game will not launch.
For all other games: enter BIOS/UEFI and disable TPM. The exact location depends on your motherboard model.
7. Disable Bluetooth in Device Manager
The Bluetooth module has a permanent hardware address (MAC) that the spoofer does not change. If left enabled, the new installation can be linked to your previous system.
Press Win + X → Device Manager.
Expand the Bluetooth section.
Right-click each adapter and select "Disable device".
Tip: If your BIOS has an option to completely disable the Bluetooth controller at the hardware level, use it.
8. Run Saturn on the Clean System
After reinstalling Windows and disabling Bluetooth, install and run Saturn. Do not launch the game or any other software before this.
Open Saturn.
Create a new device profile (do not import or use an old one).
Run the spoofer and wait for the success confirmation.
Do not touch devices: Do not unplug or plug in mice, keyboards, headsets, USB drives, or gamepads. This creates a new hardware identifier that will not be masked, and the ban will return.
Do not change network state: Do not switch Wi-Fi, or disable/enable the network adapter. The network must remain in the exact state it was in when the spoof was performed.
9. Log in with a New Account
Create an absolutely new gaming account. Never use an account that has ever been kicked or banned, even on this clean setup. Ban history is tied to the account independently of hardware.
10. Restrict Your Network (Do this BEFORE spoofing in Step 8)
These actions must be performed BEFORE running the spoofer in Step 8. Changing adapters after IP spoofing breaks the spoof and can cause a ban.
Disable unused adapters: In Device Manager, disable all free Ethernet/Wi-Fi adapters, virtual adapters (VPN, Hamachi, etc.), and Bluetooth.
Use a VPN: For extra privacy, use a VPN (e.g., Cloudflare WARP) to change your public IP address.
💡 Tip: If possible, connect via a phone hotspot before spoofing the IP. This gives you a clean network path. Keep it connected during the spoof and the first game launch. Do not switch networks afterward.
11. Minimize Traces
During the first session, do not run anything on the system other than Saturn and the game itself:
❌ No other cheats or injectors running alongside Saturn.
❌ No custom or pre-modified OS builds. Use only the freshly installed clean Windows.
❌ Disconnect backup drives and all unused USB devices. Do this BEFORE IP spoofing, never after.
If all steps were followed exactly, your system is completely isolated from previous bans. Enjoy your game!
