Instructions for cheat Salamander

This article is a step-by-step guide for preparing the system and correctly launching the Salamander cheat for RUST. It covers required Windows and game settings, system requirements, and solutions to common launch errors.

2 мин чтения320 словОбновлено
TelegramVKX
Instructions for cheat Salamander

DOWNLOAD LOADER

⚠️ Pre-Launch Requirements (EN)

❗ Must Read

Without completing these steps, the software will not work correctly!

🔍 System Checks

  • Disable Antivirus — make sure your Anti-Virus is turned off

  • Display Mode — before using the product, make sure you are using Borderless Windowed or Windowed mode

  • Nvidia Settings:

    1. Adjust desktop size and position

    2. Check: "Full-screen"

  • Models/Rendering not at player level? — issue with your resolution. Set a lower resolution and check, or reset resolution to factory defaults.

🪟 Windows 24h2

Windows 24h2 Exception: clean system without any optimizations or custom versions — preferably 2024 release.

🛡️ Anti-Cheats / Antivirus

If you have FACEIT, Riot Vanguard, etc. installed — you must remove them. Also disable/remove all antivirus programs!


❗ Common Errors

Errors: SSL Connect Error, Curl, Host, Synchronization Time

Errors are related to your ISP blocking our server.

✅ Fix:

  1. Go to Windows Settings

  2. Open "Time & Language" → "Date & time"

  3. Perform Time Synchronization

💡 If error persists

If the error still occurs — close Zapret or use a VPN.


🎮 MANDATORY Discord Setup

❗ CRITICAL

MANDATORY TO COMPLETE THIS STEP, OTHERWISE THE SOFTWARE WILL NOT WORK!!!

Before launching the loader, you must run Discord as Administrator and follow these steps:

  1. Go to Settings"Game Overlay" tab

  2. ENABLE: "Enable in-game overlay. Airiness. Speed. Wide customization options. Requires borderless display enabled."

  3. DISABLE: "Enable legacy overlay. Legacy overlay is available for all supported games."

  4. In-game, you should see: "Overlay is currently applied to the game."

⚠️ If you see 'Overlay initializing...'

Try ENABLING: "Use compatibility mode. Fixes overlay issues with focus loss during use. (Warning! This action will reduce some functionality.)"

✅ After Discord Setup

Then launch the loader, and continue with the steps below!


🚀 Launching the Loader

  1. Run loader.exe as Administrator

  2. Enter the key you purchased after buying

  3. After entering the key, wait for loading

  4. Do not touch anything and wait for PUBG to launch — the program will start the game automatically

  5. Once you've loaded to the main menu — PRESS F4 to activate the product

ℹ️ Note

Wait time: ~1 min

Open menu: Right Shift

Was this article helpful?

Your anonymous feedback helps us improve content quality.

Read more