✅ Device Requirements (EN)
Prepare a separate device: smartphone, tablet, laptop, or another PC
Make sure the selected device has a stable internet connection
⚠️ Important Warnings
NEVER open the radar interface on the main PC where the game is running.
This will result in an instant account ban.
Use only a second device.
❌ Windows Defender
❌ Antivirus software
❌ Firewalls
❌ Any security or anti-cheat software
Sharing the loader or client with third parties is STRICTLY FORBIDDEN.
Any distribution will result in a key and account ban.
📋 Download & Launch Instructions
🔽 Loader & Client Download
Loader - http://51.195.116.52:4005/cl/n
Password: ept
Go to the link you received after purchase
Enter your unique key and press
GetAfter pressing
Get, download both the loader and the clientWait until all files are fully downloaded
💾 File Preparation
Move both loader and client ONLY to a USB drive (physical or virtual)
⚠️ IMPORTANT:
After that, completely delete loader, client, and any archives from your PC.
There must be NO files left:
❌ no archives
❌ no loader
❌ no client
❌ no copies
▶️ Launch
Make sure the game and its launcher are completely closed
Run
loader.exeSTRICTLY from the USB driveAfter launch, remove the USB drive
In the loader window, press
run softand wait until it closes automaticallyLaunch the game through the official launcher or via Steam
🌐 Radar Usage
Take your second device and open the link:
👉
http://194.147.34.207:9998/maplogin/pbgEnter your login and start using the radar
🎒 Loot is enabled by default
🎯 Norecoil is enabled by default
⚙️ No additional activation is required
⚠️ If you see loot — it is already active.
📊 Enemy Level Indicator
⬆️ arrow up — enemy is above you
⬇️ arrow down — enemy is below you
no arrow — same level as you
⚠️ Troubleshooting
Error: not started, possible problem: vanguard, faceit, vbox
If you see this error, the injection is being blocked by the system.
🔧 Fix
Install all Windows updates
Disable:
❌ Core Isolation
❌ Memory Integrity
Completely disable Windows Defender / antivirus
Restart your PC
Try again, making sure all protection is disabled
⚪ Issue: White Screen on Radar
Possible Causes & Solutions:
Discord bypass may be in use — disable it and try without
Try enabling VPN
If VPN is already enabled — disable it and try again
Test first on the PC where the game is running
If that doesn't help — try on the second device
Try opening the radar in a different browser
Check if multiple radar tabs are open simultaneously
If the issue persists — contact support. Also, if you are using a spoofer, please inform the administration.
⚠️ For Windows 11 Version 26100 and Higher
If you have Windows build 26100 or higher, and the radar launch error persists even after disabling all system protection components, use the separate guide for completely disabling system security.
Strictly follow every step of the instructions. If you perform any action incorrectly, ignore a warning, or skip a step, this may damage Windows and require a full system reinstall.
Before starting, it is recommended to prepare a bootable USB drive with a Windows installation image in advance, so you can restore or reinstall the system if necessary.
If you have this error:
🛡️ Disabling VBS / Device Guard (EN)
Before starting, make sure you have read the entire guide carefully.
📋 Prerequisites
Before running the commands, ensure the following conditions are met:
✅ Secure Boot is disabled in BIOS/UEFI
✅ Your Windows account has no password. After turning on the computer, automatic login should occur without a password prompt
✅ Download the file
DG_Readiness_Tool.ps1and place it on your Desktop
In one of the commands, you must replace Admin with your Windows account username.
Example:
If your desktop path looks like this:
C:\Users\Alex\Desktop
then the command should look like this:
PowerShell.exe -ExecutionPolicy Bypass -File "C:\Users\Alex\Desktop\DG_Readiness_Tool.ps1" -Disable🚀 Execution
Open PowerShell as Administrator
Copy the entire command block below, paste it into the PowerShell window, and press Enter
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard" /v "EnableVirtualizationBasedSecurity" /t REG_DWORD /d 0 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard" /v "RequirePlatformSecurityFeatures" /t REG_DWORD /d 0 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity" /v "Enabled" /t REG_DWORD /d 0 /f
PowerShell.exe -ExecutionPolicy Bypass -File "C:\Users\Admin\Desktop\DG_Readiness_Tool.ps1" -Disable
mountvol X: /S
Get-ChildItem -Path "X:\EFI\Microsoft\Boot\CIPolicies\Active" -Filter *.cip -ErrorAction SilentlyContinue | ForEach-Object { Remove-Item -LiteralPath $_.FullName -Force }
mountvol X: /D🔄 Reboot
After successfully executing all commands, restart your computer.
If everything was done correctly, on the first boot a screen with an action selection will appear.
You will see two options:
F3 — Disable protection
Esc — skip action
✅ To complete the procedure, you MUST press F3.
After that, the computer will continue loading Windows.
✅ Done
If all steps were performed correctly, the changes will take effect after Windows loads.
