Instructions for UDP

🎮 UDP Loader Launch Guide

Loader: https://undetect.net/loader_udp

💡 First launch: if you are using the Loader for the first time, it may restart your computer several times. After each restart, open the Loader again and continue.

⚙️ Preparation Before Launch

⚠️ Important: disable everything related to system security, for example: Windows Defender, Windows password (if you are using the spoofer), and anything else protecting the system — antivirus software, Secure Boot, etc.

1. Launch the Loader.

2. Copy and paste your license key by right-clicking inside the CMD Loader window, then press Enter to continue.

🧹 Cleaner: the Loader includes a built-in cleaner. Every time you launch the Loader, it will ask whether you want to use it.

🖥️ Discord or Medal Setup

Install Discord or Medal.

Discord Guide

1. Install the Discord application.

2. Run Discord as administrator.

3. Enable the required features by following the screenshots.

If Discord shows “No suitable overlay found”, please follow the screenshot below:

[SCREENSHOT PLACEHOLDER]

🎯 Note: regardless of what you may think, the game must always be running in Borderless or Windowed mode. These are the only two display modes officially supported.

🚀 Launching the Loader and Game

1. Launch the Loader.

   Keep your mouse cursor on the monitor where you are going to launch the game.

2. Copy and paste your license key by right-clicking inside the CMD Loader window, then press Enter to continue.

3. If the Loader offers the built-in cleaner or spoofer, select the option you need.

4. Launch the game as soon as the command prompt window closes.

5. Wait until the cheat menu appears in the game. This may take up to 3 minutes.

⌨️ Menu hotkey: Insert

🛠️ Loader Launch Errors

Below are all known errors that may occur when launching the Loader. You can resolve them by following the corresponding instructions.

Rainbow Six / QB

Upload your QB to GoFile or LimeWire.

You can find your QB here:

Press Windows + R on your keyboard and enter the following path:

%localappdata%/Ubisoft/r6s

Upload the RainbowSix.exe file and then share the link with the support team.

Rainbow Six Error Codes

If you receive one of the following error codes:

Upload your QB to GoFile or LimeWire.

Press Windows + R and enter:

%localappdata%/Ubisoft/r6s

Upload the RainbowSix.exe file and then share the link with the support team.

🔐 Device Guard and Credential Guard

❗ Important: before starting this guide, make sure that the PIN, password, and all other Windows sign-in protection methods are completely disabled on your PC, and that you have switched to a local account. Otherwise, critical errors may occur.

Step 1. Prepare the Files

Download the official Device Guard and Credential Guard Hardware Readiness Tool (dgreadiness) from the Microsoft website.

Extract the downloaded ZIP archive to any convenient folder.

It is recommended that the folder path does not contain non-Latin characters. For example:

C:\dgreadiness

Step 2. Launch PowerShell

1. Open the Start menu and search for PowerShell.

2. Right-click Windows PowerShell.

3. Make sure to select Run as administrator.

Step 3. Enter the Commands

Run the following commands one by one in the blue PowerShell window.

1. Allow script execution:

Set-ExecutionPolicy Unrestricted -Scope Process

2. Navigate to the folder where you extracted the utility.

Type cd, add a space, and specify the path to your folder.

Example:

cd C:\dgreadiness

Press Enter.

3. Run the script to disable the protection:

.\DG_Readiness_Tool_v3.6.ps1 -Disable

Step 4. Restart and Confirm

🚨 VERY IMPORTANT: do not skip this step.

Close PowerShell and restart your computer.

While the PC is starting, before Windows loads, a system message may appear on a black screen asking whether you really want to disable Device Guard and Credential Guard.

If it appears, press F3 on your keyboard to confirm.

If you skip this step, the protection will not be disabled.

🧩 BIOS, AES, RAID and HyperVisor Errors

AES

Your processor does not support AES instructions, or AES is disabled in BIOS.

Make sure that AES is enabled in BIOS.

IDE / RAID / AHCI

Disable IDE/RAID mode or anything else that is not AHCI.

Restart your computer.

If this does not help, remove everything that uses HyperVisor.

Integrated Graphics

Disable integrated graphics in BIOS.

hvax64

Delete hvax64 manually.

Read this: (CLICK)

IRST / RAID / iaStor

If IRST/RAID is disabled, you need to disable all drivers and services starting with “iaStor”. Use DriverView or ProcessHacker to find them.

If RAID/IRST is disabled but the issue still occurs, read the information shown in the image:

[SCREENSHOT PLACEHOLDER]

Microsoft Storage Spaces

⚠️ Disable Microsoft Storage Spaces via Control Panel → Storage Spaces. This may result in the loss of all data on the drive.

Restart your PC and try again.

💻 PowerShell and HyperVisor

Run PowerShell as administrator and use the following command:

Set-ExecutionPolicy RemoteSigned

After using the command above, restart your computer and download the PowerShell file.

Open it as a TXT file — double-click the PS1 file that you can download below.

Then run PowerShell as administrator and enter all commands one by one. After that, restart your computer.

takeown /F "C:\Windows\System32\hvix64.exe"

icacls "C:\Windows\System32\hvix64.exe" /grant *$(([System.Security.Principal.WindowsIdentity]::GetCurrent()).User.Value):F

takeown /F "C:\Windows\System32\hvax64.exe"

icacls "C:\Windows\System32\hvax64.exe" /grant *$(([System.Security.Principal.WindowsIdentity]::GetCurrent()).User.Value):F

del "C:\Windows\System32\hvix64.exe"

del "C:\Windows\System32\hvax64.exe"

🧠 Virtualization Settings

INTEL — enable Intel VT-X in BIOS.

AMD — enable AMD SVM in BIOS.

🛡️ Antivirus and Anti-Cheat Software

Disable or uninstall your antivirus software or the FaceIT/Vanguard anti-cheat.

Restart your computer and try launching the cheat again.

🆔 HWID Error

HWID verification error or HWID mismatch.

1. Reinstall Windows and try again.

2. If that does not work, request an HWID reset in the main Discord channel or through your seller's support chat.

If Something Else Is Already Spoofing the HWID

Restart your computer and try again.

If this does not help, something else is already spoofing the HWID. Find out what it is and disable it.

Open CMD as administrator and enter these commands one by one:

wmic diskdrive get Caption

SerialNumberwmic baseboard get SerialNumber

getmac

If any of these commands returns an error, try reinstalling Windows and check whether the issue has been resolved.

This issue may also be caused by a spoofer.

🎨 NVIDIA and Fonts

NVIDIA Drivers

Update your NVIDIA drivers using Nvidia GeForce Experience or the NVIDIA App.

Font Download Error

Download the font manually from the provided link and place it in the following directory:

C:\Windows\Fonts

Alternatively, use a VPN and the Loader will download it manually.

Restart your computer.

If that does not help, use a VPN.

📦 Additional Resources

Download and install the required resources using the provided link.

💾 RAM Requirement

🧠 Make sure your computer has 16 GB of RAM or more.

🔄 Windows Startup

Disable everything in Task Manager → Startup, then restart your computer and try again.

Make sure the Loader is stored directly on your PC and not inside cloud storage such as OneDrive or Mega.nz.

AutoRuns

Download AutoRuns and disable everything related to:

Microsoft/Windows/CurrentVersion/Run

⚠️ Do not change anything else.

💿 Virtual Disk, RAID and Intel RST

Disable the virtual disk or RAID in BIOS and disable Intel Rapid Storage Technology (RST) if it is available.

If this does not resolve the issue, find drivers and services starting with “iaStor” using DriverView or ProcessHacker and disable the corresponding service.

If none of this works, try reinstalling Windows.

🌐 VPN and Connection Problems

Try again.

If it does not work, use a VPN.

If the VPN does not help either, reinstall Windows.

🔑 Windows Account Password

Disable the password on your Windows account, download the file, and run it.

🪟 Windows Version

Roll back or update your Windows version or build.

If this does not help, use an original Windows installation without modified or unofficial builds.

🟠 Server Maintenance

🔧 The servers may be undergoing maintenance. Follow the news on our Discord server.

If the issue is not on our side, try using a VPN.

🆔 Different Spoofer Option

Use another available spoofer option.

For example, if you are using EAC, simply use the regular option instead.

✅ Quick Launch Checklist

1. Prepare Windows and the required system settings.

2. Install Discord or Medal.

3. Run Discord as administrator and configure the overlay.

4. Set the game to Borderless or Windowed mode.

5. Launch the Loader.

6. Enter your license key.

7. Use the built-in cleaner or spoofer if required.

8. Launch the game after the CMD window closes.

9. Wait up to 3 minutes for the menu to appear.

10. Press Insert to open the menu.

✅ If the Loader does not start or displays an error, find the corresponding section above and follow the listed instructions.