REINSTALL WINDOWS WITH A USB (RECOMMENDED)

STEP 1:

• Download the Media Creation Tool above, click "Download Now".
•  Open the Media Creation Tool as an administrator. 
• Select Create Installation media (USB Flash drive). 
• Use all the recommended options & continue & wait for it to finish.

YOUR USB CONTENTS LOOK LIKE THIS NOW

<br>

NOTE: When reinstalling Windows, most modern systems will automatically detect and install basic Ethernet drivers, so ur connection will work fine after the installation. ✅

In some cases, you may need to manually download and install network drivers.

Make sure to download your network drivers (LAN) from your corresponding motherboard model. So for example "Asus B550 Network drivers" on Google, and put them in the USB drive. You can skip this step since this is just a precaution, but there is a small risk of no connection after reinstallation. 🌐

STEP 2:

Restart the computer, and hold shift at the same time.

Select Use a device and select the USB (Known as "Flash Drive")  

STEP 3:

Select Windows 10 Pro(IMPORTANT!)  

Select "I don't have a product key" (No worries about this)

STEP 4:

  Select Custom: Install Windows Only (advanced)

1. Press SHIFT + F10 (A CMD will pop up)
2. Now write " diskpart " into the CMD 💬
3. Then write " list disk " into the CMD to see all ur drives 💬
4. Write "  select disk 'X' " (X = Disk number) then write "  clean " for ALL disks, besides ur USB.

For example, most people have one disk. Then write 'select disk 1' and then 'clean'. In case u have two drives, ur gonna 'select disk 2', and write 'clean' and so forth. ✅

Flash drives (USB) usually have a smaller size compared to internal hard drives or SSDs, and are likely the last drive listed! DO NOT CLEAN YOUR FLASH DRIVE (USB)!

Still Unsure? Please contact us to solve it together. 🤝

Now it should output: 'Succeeded in cleaning the disk' or something related to 'success'

Close the CMD and click Refresh  

STEP 5:

1. Select your main drive (Unallocated Space) and click Next
2. The installation process should start, AND MAKE AN OFFLINE ACCOUNT!

Turn OFF All privacy questions/settings

Make sure to follow these steps while and after reinstallation:

1. Make an offline account or a new Microsoft account. Don't log in to the old ones.

2. Do not log in to OneDrive, Gefore Experience, & Medal using the same account.

RAID REINSTALL WINDOWS:

STEP 1:THE SAME AS WITH A NORMAL INSTALLATION

STEP 2:

Once completed, and the USB looks like the screenshot above, restart the computer, and boot into bios.You can find out how to enter the BIOS in our blog:Блог | Как отключить Secure Boot на разных материнских платах

STEP  3:

Once in BIOS, follow the steps listed here down below to enable RAID.

Advanced > Integrated peripherals (or) Storage Configurations. SATA Mode > "RAID" / NVME Mode > "RAID" SAVE & EXIT BIOS, GET BACK INTO BIOS AGAIN AFTER.

STEP 4:

Set the settings as shown in this video - https://streamable.com/9o2zci