IMPORTANT READING

Before activating the key, be sure to read the instructions below and follow all the steps. Failure to comply with the requirements may lead to errors in the operation of the software.

⚠️ General information and risks

Using any gaming software is always associated with risk

Software is purchased at your own risk

Undetected status does not guarantee 100% protection from blocking

Ban is possible with any software and in any game

If the game has an update, wait for the software update

Use any gaming software consciously

✅ Requirements before activating the key

1. Install: *link*
2. Read these instructions carefully
3. Be sure to restart your computer before launching the software for the first time

❌ MUST DISABLE OR DELETE

• Completely remove antivirus
• Disable Windows Defender
• Disable SmartScreen
• Remove FaceIt
• Remove Vanguard

ℹ️ FaceIt is a separate anti-cheat for CS2

Vanguard - Valorant anti-cheat

🛠 Preparation before activating the key

(PUBG ESP / Delta Force)

Download SteelSeries GG: *link*

To get the SteelSeries Sonar overlay to work, open the SteelSeries settings tab, go to Settings -> Moments -> Capture and Audio, turn off "Allow Moments to capture while playing"

Go to Overlays and Notifications, turn off Show Game Overlays, enable Sonar under General Settings, go to SONAR, and then set a shortcut key for the Sonar overlay (such as Master Volume Up), press it every time before launching the loader.

Disable Intel Rapid Storage Technology in BIOS

Install it: *link*

▶️ Startup instructions

1. Download the loader and place it anywhere (it is recommended to create a separate folder)
2. Run the file as administrator
3. Wait for the loader to update and run it again
4. Enter your key and press Enter 💡 Inserting a key in CMD - RMB of the mouse
5. Click "Yes" if you want to clear traces of previous bans
6. Click "Yes" if you need a spoofer
7. After successful loading, the loader will automatically close
8. Launch the game - the menu will appear automatically

🎮 Menu management

• Home / Insert - open / close menu
• END - unload software

🧩 Errors and their solutions

🔻 Loader closed without errors

• Install: *link*

🔻 There is a menu, but it doesn’t click

• Run overlay as administrator
• Disable all third party overlays
• Run Steam NOT as Administrator

🔻 Error

"Make sure all antiviruses are disabled" (Windows 10)

• Remove all third-party antiviruses
• Disable real-time protection
• Disable SmartScreen

🔻Error

"Make sure all antiviruses are disabled" (Windows 11)

1. Download both files: *link*
2. Run Turn_ON, confirm changes, restart PC
3. Run Turn_OFF, confirm changes, restart PC
4. If it doesn't help: Check that the antivirus is uninstalled
5.  Real-time protection disabled

🔻 The menu disappears / visuals do not work

• If there was a patch, wait for the product update
• Check the integrity of the game files (a full reinstallation is recommended)
• If it doesn't help, contact support.

🔻 The menu does not open the first time

• Steam - without administrator rights
• EA App - Disable Overlay in Settings

🔻 AES instruction set is not supported

• Your processor does not support AES
• The error is not corrected - ask for a refund

🔻 Please enable Intel VT-X / AMD-V

• Go to BIOS
• Enable: Intel Virtualization Technology / VT-X AMD-V / SVM Mode
• Intel Virtualization Technology / VT-X
• AMD-V / SVM Mode

🔻 Please disable Secure Boot

• Go to BIOS
• Disable Secure Boot

🔻 Unsupported firmware

• Convert your system disk to GPT format (via mbr2gpt or any disk manager)

🔻 Secure boot keys are incorrect

1. Enable Secure Boot in BIOS
2. Boot into Windows
3. Open PowerShell and run:

Confirm-SecureBootUEFI

If the result is True:

• Reboot
• Go into BIOS again and disable Secure Boot

🔻 VMX / SVM is not supported

1. Control Panel → Programs and Features
2. Turn Windows features on or off
3. Make sure Hyper-V and Virtual Machine Platform are disabled
4. If it doesn't help:

🔻 Incorrect HWID

1. Open CMD as administrator
2. Do one by one:
   wmic diskdrive get Caption, SerialNumber / wmic baseboard get SerialNumber
   
3. If the commands run without errors, but the problem remains:
4. Try reinstalling Windows
5. Check if the error is gone