⚠️ IMPORTANT — PLEASE READ CAREFULLY

📌 Requirements Before Key Activation

Before using the software, you must complete all steps below:

• Install the required component: *link*
• Carefully read this instruction from start to finish
• Reboot your computer before launching the software (mandatory)

❗ Reminder:

• Using any game-related software is always a risk
• You purchase and use the software at your own risk
• Undetected status does not guarantee 100% protection from bans (a ban is always possible with any software in any game)
• If the game receives an update — wait for the software update
• Use any game software at your own responsibility

❌ REQUIRED: DISABLE OR REMOVE

Before launching the software, you must:

• Remove any antivirus
• Disable SmartScreen
• Disable Windows Defender
• Uninstall FaceIt
• Uninstall Riot Vanguard

ℹ️ Notes:

• FaceIt is an anti-cheat for CS:GO
• Vanguard is an anti-cheat for Valorant

▶️ Launch Instructions

1. Download the loader and place it anywhere (recommended: create a separate folder for it)
2. Run the loader as Administrator
3. Wait for the loader to update
4. Launch the new file again
5. Enter your license key and press EnterTo paste the key into the CMD loader, use the right mouse button
6. Press “Yes” if you need to clean traces of previous bans
7. Press “Yes” if you need the spoofer
8. After successful loading, the loader will close automatically
9. Launch the game

🌐 A browser page will open automatically

• If you accidentally close it, press Insert to open it again
• If you want to share the link, make sure you copy the entire URL including the token (example: link.com/session_id=jfsdohfhh)

🛠 Errors & Solutions

❗ Loader closed without any error

• Install: *link*

❗ Menu appears but you cannot interact with it

• Run the overlay as Administrator following the instructions above

❗ Error

“Make sure all antiviruses are disabled” (Windows 10)

• Remove all third-party antiviruses
• Disable real-time protection
• Disable SmartScreen

❗ Error

“Make sure all antiviruses are disabled” (Windows 11)

1. Download both files: *link*
2. Run Turn_ON, accept registry changes
3. Reboot your PC
4. Run Turn_OFF, accept registry changes
5. Reboot your PC again
6. If the issue persists, verify that: Antivirus software is fully removed Real-time protection is disabled
7. Antivirus software is fully removed
8. Real-time protection is disabled

❗ Other loader-related errors

• Send a screenshot of the error to support on the website (button in the bottom-right corner)
• Download AnyDesk and provide access details in the support chat

❗ Menu is visible but not clickable

• Run Steam NOT as Administrator
• Disable all third-party overlays (leave only NVIDIA or AMD depending on your GPU)

❗ Menu disappears or visual features do not work

• If the game was patched — wait for the product update
• Verify game file integrity
• Best solution: fully reinstall the game
• If nothing helps — contact support

❗ Menu is not clickable / does not open on first attempt

• Run Steam WITHOUT admin rights (if using Steam)
• Disable EA App overlay in settings (if using EA App)

❗ AES instruction set is not supported

• Your CPU does not support AES
• This issue cannot be fixed ➡️ Contact us for a refund

❗ Please enable Intel VT-X in the BIOS

• Enter BIOS
• Enable Intel Virtualization Technology / Intel VT-X

❗ Please enable AMD-V in BIOS

• Enter BIOS
• Enable AMD-V / SVM Mode

❗ Please disable Secure Boot in the BIOS

• Enter BIOS
• Disable Secure Boot

❗ Unsupported firmware

• Convert your system disk to GPT
• Use mbr2gpt or any disk management utility

❗ Secure boot keys are incorrect and need to be enrolled

1. Enable Secure Boot in BIOS and save settings
2. Boot into Windows and open PowerShell
3. Run: Confirm-SecureBootUEFI
   

If the result is True:

• Reboot your PC
• Enter BIOS and disable Secure Boot

❗ VMX / SVM is not supported

1. Go to: Control Panel → Programs → Turn Windows features on or off
2. Make sure Hyper-V and Virtual Machine Platform are disabled
3. If the error persists: Open CMD as Administrator Run:
4. Open CMD as Administrator
5. Run: bcdedit /set hypervisorlaunchtype off

Reboot your PC

❗ Incorrect HWID

1. Open CMD as Administrator
2. Run the following commands one by one:

wmic diskdrive get Caption, SerialNumber

wmic baseboard get SerialNumber

If both commands work but the issue remains:

• There may be a system problem
• A clean Windows reinstall is recommended

📞 Support

If you encounter any other issues, please contact support via the website. The support team will assist you.